kascesql.blogg.se

How to add another drawing to sheetcam
How to add another drawing to sheetcam








how to add another drawing to sheetcam
  1. #HOW TO ADD ANOTHER DRAWING TO SHEETCAM FULL#
  2. #HOW TO ADD ANOTHER DRAWING TO SHEETCAM CODE#

Unlike many CAM packages the post format is freely available and documented.

#HOW TO ADD ANOTHER DRAWING TO SHEETCAM CODE#

These can be fine-tuned to produce code for virtually any machine. To get over this, SheetCam comes with a wide variety of post processors. While G-code is theoretically a standard, most machines have their own dialects. Parts can be placed in an array to quickly fill a sheet with minimum effort.

how to add another drawing to sheetcam

They can be flipped and rotated to make most efficient use of the material. Peck drilling with controllable retract amount Ramp cutting to allow plunging with non center-cutting tools.ĭrill from circles or points in a DXF file SheetCam gives you many options to optimize cutting. Once you have defined you tool you can set up the cut. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. Draw your part the size you want and let SheetCam work out where to run the torch.Īutomatic cut ordering to ensure that inside contours are always cut before outside contours. You can define as many tools as you like for different materials etc. The tool definition allows you define all of the important parameters for cutting. SheetCam combined witn Mach3 and a torch height controller from CandCNC for an unbeatable plasma cutting solution. This is useful for machines running Mach3 for instance.

#HOW TO ADD ANOTHER DRAWING TO SHEETCAM FULL#

SheetCam has many useful features for plasma, laser, waterjet and oxy-fuel cutting.įor machines that have full control over the Z axis you can program the pierce height and cut height directly.










How to add another drawing to sheetcam